Handgun Hanger Safe Security Cable Instructions
Power Cable Installation
Step 1:
Wrap cable around a secure object
and insert lock through the loop on the
other end of the cable.
To install power cable,
simply insert cord
into the power cable
hole and plug into an
outlet.
Step 2:
Make sure bolt is in unlocked
position. Insert locking bolt into hole located
at the rear of the safe.
Step 3:
Twist key to the RIGHT
(clockwise) to lock cable in place.
Remove key.
Your security cable is now installed.
*To unhook cable, insert key and
twist to the LEFT (counter-clockwise).
Remove lock.
Security
Cable Hole
Power
Cable Hole
Step 1
Unlocked
Key will only release while locked.
Locked
Step 2
Step 3