Stealth IDM-PCB-L, Руководство пользователя

Страница: 36 / 48

27
Parameter Settings 17.0
Jack Ring Action

Use this action when a button is connected to the ring of the input jack (use a splitter cable
to access the ring of the jack).
Parameter Setting
Combined Double Action Two actions are executed with the same but-
ton.
Combined Triple Action Three actions are executed with the same
button.
Open/Close Arm Open/Close arm, the direction will alternate.
Open Arm Open the arm.
Close Arm Close the arm.
Operate Output Tip Actuate the tip of the output jack.
Operate Output Ring Actuate the ring of the output jack.
No Action (default) Nothing will happen.
Motor Mode
Parameter Setting
Move Arm Momentary (default) The arm moves as long as the button is
pressed.
Move Arm to End The arm moves towards the end even after
the button has been released. Pushing the
button again will stop the arm.