Stealth DIGI-ARC 160PFC MV, Руководство оператора

Страница: 13 / 24

STEALTH DIGI-ARC 160PFC MV
13
4 OPERATION – CONTROL AND CONNECTORS
4.1 Machine Controls
1 Conversion switch: Select (up) – MMA
Select (middle) – VRD MMA
Select (down) – TIG
2 Current display: Displays when machine is working.
3 Alarm pilot lamp: When the machine loses voltage, over-current, or over-heat, the
pilot light indicates that the protection of the machine has been activated.
4 Power pilot lamp: Lights when machine is on.
5 Welding current regulation: Set welding current.
6 Earth connection: Negative polarity output.
7 Welding connection: Positive polarity output.
8 Cable clamp: Connected to the mains cable.
9 Power switch: Select ‘ON’ for power on, select ‘OFF’ for power off.
10 MMA pilot lamp: Lights when MMA selected (up).
11 VRD MMA pilot lamp: Lights when VRD MMA selected (middle).
12 TIG pilot lamp: Lights when TIG selected (down).
OPERATION CONTROL AND CONNECTORS
10
§
4 Operation control and connectors
§
4.1 Layout for front & rear panel
1
Conversion switch: Choose (up), MMA;
Choose (middle) , VRD MMA;
Choose (down) , TIG.
2
Current display: Welding Current display when machine is working.
3 Alarm pilot lamp: When the machine less voltage, over current, or over heat, This
pilot lamp indicates when lit that the protection of the machine has been activated
4 Power pilot lamp: This pilot lamp when lit indicates that the machine is on.
5 Welding current regulation: Set welding current.
6 Earth connection: Negative polarity output.
7 Welding connection: Positive polarity output.
8 Cable clamp: Fastened the mains cable.
9 Power switch: Choose “ON”, power through; Choose “OFF”, power cut off.
10 MMA pilot lamp: This pilot lamp lit When choose (up), MMA.
11 VRD MMA pilot lamp: This pilot lamp lit When choose (middle) , VRD MMA.
12 TIG pilot lamp: This pilot lamp lit When choose (down) , TIG.