Stealth 3332081, Руководство пользователя

Страница: 9 / 16

9
1
OFF
ON
Fig G
).
1
OFF
ON
Fig D
1
Fig E
Fig C
4. Plug in the power cord
• Use a dedicated circuit. The compressor will use the full capacity of a typical 15A household circuit. If any
other electrical devices are drawing from the compressor's circuit, the air compressor may fail to start. Low
voltage or an overload circuit can result in sluggish starting that causes the motor overload protection system
or circuit breaker to trip, especially in cold conditions.
• Disconnect the power cord only after break-in process has been completed, other wise the motor might get
damaged.
5. Set the ON/OFF switch (1) to the ON position. The compressor will
start. Run the compressor for 30 minutes. If it fails, turn it off
immediately and call the toll-free helpline at: 1-888-899-0146.
use( ).
6. After 30 minutes, turn off the ON/OFF switch.
7. Close the tank drain valve (1) by turning it clockwise ( ).
pressure and then the compressor's motor will stop. The compressor is now
ready for use.
2. Open tank drain valve (1) by turning it counter-clockwise to permit the air
to escape and prevent air pressure build-up in the air tank during the break-in period (
3. Turn the air pressure regulator knob (1) clockwise until it stops ( ).
Break in the pump
1.Set the ON/OFF switch ( 1) to the OFF position ( ).
Operating Instructions
Fig F
OFF
AUTO
I
I
ON
OFF