Stealth 3331282, Руководство оператора

Страница: 12 / 15

12
POSSIBLE CAUSE
PROBLEM
SOLUTIONS
The pressure is
low or there is
not enough air.
There is
moisture in the
discharge air.
The compressor
overheats.
TROUBLESHOOTING
There is a leak at one of the fittings.
The tank drain valve is open.
The air intake is restricted.
Prolonged excessive use of air.
There is a hole in the air hose.
The tank leaks.
The valve is leaking.
There is condensation in the air tank
caused by a high level of atmospheric
humidity or because the air
compressor has not been running long
enough.
The ventilation is inadequate.
Cooling surfaces are dirty.
The valve is leaking.
Check the fittings with soapy water. Tighten or
reseal leaking fittings (apply plumber s tape on
threads).Do not over tighten.
Close the drain valve.
Clean or replace the air filter element.
Decrease the amount of air used.
Check the air hose and replace it if necessary.
Replace the tank immediately. Do not attempt to
repair it.
Check for worn parts and replace them if
necessary.
Drain the air tank after each use. Drain the air
tank more often in humid weather and use an
air-line filter.
Relocate the compressor to an area with cool, dry
and well-circulated air.
Clean all cooling surfaces on the pump and the
motor thoroughly.
Replace worn parts and reassemble using new
plumber's tape.