Stealth Products i-Fit IFCS, Руководство пользователя

Страница: 48 / 60

38
Installation Instructions 12.0
Push Button
The Push Button is used on i-Fit pelvic belts.
Step 1: To remove the push button from the belt, push down on the female buckle with the i-Fit logo,
releasing the buckle from the female housing.
Step 2: Remove the male push button and attached buckle from the female buckle. Make any adjust-
ments necessary.
Step 3: To reattach the push button, slide the buckle into the housing. An audible ‘ click ’ should occur
when the male button has been fastened into place, indicating that the belt is secure. If the button
does not latch and hold, immediately refrain from using the product.
1
2
3
CAUTION
Before engaging the chair, check that all buckles and straps are clear from any
mechanical components to prevent damage.