Stealth Products i-Drive VR, Руководство пользователя

Страница: 10 / 24

Setup 8.0
2
Initial Setup 8.1
All necessary software will be pre-installed on the laptop included in the VR system
package. Follow the instructions below to setup and initiate the i-Drive VR Driving
Simulator.
Step One: Connect the laptop to a power source. The laptop must be connected to a
power source while using the i-Drive VR Driving Simulator.
Step Two: Turn the laptop on. You should be taken to a login screen displaying a
Microsoft email account and an empty input box labeled “PIN”. Input the number 2223.
• Make note of this Microsoft email address. Information regarding the VR system will be
mailed to this address, and the address will be used to register your system for further
updates.
Step Three: Plug the i-Drive interface into the laptop. This includes connecting:
• the USB to the laptop
• the mini USB to the i-Drive interface
• the control input (joystick/switch) to the i-Drive interface. (
Note : The i-Drive interface
only accepts Hirose micro-miniature interface connectors. i-Drive interfaces come with
two compatible dongles.)
• the 12V i-Drive power cord to the i-Drive interface
• the 12V i-Drive power cord to the power source (e.g., wall outlet)
DO NOT PLUG IN THE VR GOGGLES AT THIS POINT.
Step Four: On the laptop’s desktop, double-click the icon labeled “06-Step1”. This will
open a command prompt.
• The prompt will require the “port index or full name”. Input the number 1 and press
“Enter” on the laptop keyboard.
• The command screen will now display an ongoing series of zeros. Try moving the
joystick or activating the switch connected to the i-Drive interface -- if this alters the
series of zeros, the joystick/switch is communicating properly with the laptop and the
i-Drive interface.
• Minimize the command screen when proper device communication has been
confirmed .
DO NOT EXIT OUT OF THE COMMAND PROMPT SCREEN.