Stealth Cam Titan STC-Z3IR, Инструкция по эксплуатации

Страница: 14 / 28

WWW.STEALTHCAM.COM
Toll Free 877-269-8490 14
SETUP AND PROGRAMMING
•
Programming is only allowed when camera’s power switch is at the
TEST/SET mode.
•
Slide the power switch from OFF to TEST/SET position; you will hear two
faint short beeps.
•
Touch M button to enter Picture or Video mode selection.
•
Picture icon will blink. To choose still picture mode touch ▶ button to
choose this option. This will bring you to the Resolution mode.
Resolution icon will now blink.
•
Touch
▲
or
▼
button to choose your resolution. 3M pixels. 1.3M
pixels. Touch ▶ button to confirm your setting. Next will bring you to
Burst mode setting. Burst mode icon will now blink.
•
Touch
▲
or
▼
button to choose your burst mode setting. Number (BIG)
icon will flash and display the number of picture you as you scroll
through using the
▲
or
▼
button. Touch
▶
button to confirm your
setting. Next setting will be the time out setting. T.Out icon and Number
(BIG) icon will blink.
•
Touch
▲
or
▼
button to choose your time out setting. Touch ▶ button
to confirm your setting. Now the Time Out icon will blink.
•
Touch
▲
or
▼
button to choose either Second or Minute. Touch ▶
button to confirm your setting and then touch M button to exit
programing mode.
•
Note: You may see the entire screen display blink, simply touch the M
button again to confirm your settings.