Stealth Cam STC-U840IRS1, Инструкция по эксплуатации

Страница: 31 / 42

WWW.STEALTHCAM.COM
Toll Free 877-269-8490
31
For viewing on handheld LCD monitor:
•
Attach the appropriate cable to the TV port on the side of the camera.
•
Insert the other end into the VIDEO IN jack on the handheld LCD video
monitor.
•
Turn on both the camera and the monitor.
•
You will see a series of thumbnail images on your monitor.
•
Press the [UP] or [DN] button to navigate though your thumbnail images.
•
On the upper left hand corner of your TV monitor, it will either display
the image OR the image with a video icon which
indicates it’s a video clip.
•
To view in full screen, press the [OK] button.
•
Press the [OK] button again, it will return to the thumbnail view from the
full screen image.
For viewing on your home TV monitor:
•
Attach the appropriate cable to the TV port on the side of the camera.
•
Insert the other end into the RCA VIDEO IN jacks on the TV.
•
Turn on both the camera and the TV monitor.
•
Make sure to switch to AUX / VIDEO IN mode on your TV.
Ø
(See your TV owner’s manual for directions).
•
The camera’s TV OUT is set to NTSC by default. (NTSC – Standard North
American TV format)
Ø
If the TV monitor doesn’t flicker, then you do not need to change
your camera’s TV OUT setting. Proceed to the next section called
Thumbnail Images .