STC-I540IR
www.stealthcam.net
Toll Free 877-269-8490
17
Programming your camera
Slide the power switch to TEST position. You will hear two short
consecutive beeps followed by a third beep. Now you are ready to
program your camera. Press the MENU button once to start your
programming sequence.
For Manual Capture Mode
To capture still image or video clip using the manual shutter button.
The Camera icon or Video icon will flash:
Press Left/Right button to select between manual
Still Image Mode
or
manual
AVI Video Mode.
Press the OK button to confirm your setting
and then press Menu button to exit the programming mode. To
continue manual capture mode, see page 30 for operating instructions.
For Auto capturing mode, press Menu again to begin your program
setting sequence. You will see either your camera icon or video icon
flashing.
All manuals and user guides at all-guides.com
