STC-DVSIR5 Prowler DVS
www.stealthcam.net
Toll Free 877-269-8490
25
Using the camera in PIR detection mode
•
Mount the camera to tree or other sturdy object using either a
tree screw (optional accessory) or supplied mounting strap
(You may refer to the mounting suggestions section in this
manual)
•
Open the front housing and move the switch to the ON position.
At this point you have 30 seconds to make any program
adjustments.
•
After 30 seconds the camera’s green LED light will begin
blinking and enter count down mode. This is your indication to
leave the coverage area within one minute.
•
After one minute the camera will enter either image burst mode
or adjustable video mode based on your program setting. The
camera will then time out between 1 ~ 59 minutes, also based
on your setting.
The time between motion detection and the camera taking
the pictures may vary due to lighting conditions, program
setting, and battery power level.
