Steadicam Merlin 2, Руководство по установке и эксплуатации

Страница: 12 / 48

10
Gimbal
. We identified the Gimbal in Section 1, but
now examine its range of motion. The Gimbal contains
delicate bearings and must not be forced beyond its
natural range of movement.
Now you are ready to begin balancing the unit for your camera.
Watch Section 4 of the DVD,
Presetting Balance
.
Then continue with the Manual.
Grip
. The Grip supports and positions the Merlin 2.
The Grip should always be held with the rubber grip
side facing forward in contact with your fingers. If
it’s held backward, movement of the Gimbal will be
impeded and under some circumstances the Gimbal
could be damaged. Try gently moving the Grip and
Gimbal around to compare its range of motion in the
correct vs. incorrect positions.
Guide
. This is the black ring above the Gimbal. The
Guide provides a minimal surface so the thumb and
one or two fingers can aim the camera. The “Tongue”
at the front of the Guide provides extra surface area to
assist in tilting the camera. Do not rotate or adjust the
Guide yet.
Fore-and-Aft Trim Roller
, along the side of the
Stage.
Side-to-side Trim Roller
, under the Stage at the
back of the Gimbal mount.
Identify the following parts:
Getting Started