STC SPACE SAVER 30324 Скачать руководство пользователя страница 2

!

!

IMPORTANT WARNINGS AND CAUTIONS!

TABLE OF CONTENTS

1 of 12

www.stcny.com

warnings and cautions  ......................................................................      

unpack

   ..............................................................................................................      

required tools   ......................................................................................      

identify display back style, screw diameter and depth   ........       

attach to VESA 50, 75 and 100 .........................................................     

add extension wings  ..........................................................................

attach to larger displays  ....................................................................     

wall placement  .....................................................................................     

attach to wood stud   ...........................................................................     

attach to masonry walls   ....................................................................     

mount display to wall plate  ...............................................................     

secure   ........................................................................................................  

adjust   ........................................................................................................  

warranty   ...................................................................................................  

1

2

2

3

4

5

6

7

8

9

10

10

11

12

!

!

A WARNING alerts you to the possibility of serious injury or death if you do not follow the 

instructions.

A CAUTION alerts you to the possibility of damage to or destruction of the equipment if you 

do not follow the corresponding instructions.

Failure to provide adequate structural strength for this component can result in physical 

injury and damage to the equipment. It is the installer’s responsibility to make sure the 

structure to which this component is attached can support four times the combined weight 

of all equipment. Reinforce the structure as required before installing the component.

Improper installation can result in serious physical injury. This mount has been tested to 

support 50 lbs (23 kgs.) Do not exceed that weight. 

Safety measures must be observed at all times during the installation of this product. Use 

proper safety gear and tools during the installation process to prevent physical injury.

Do not install on a structure that is prone to vibration, movement or chance of impact. 

Doing so could result in damage to the flat panel display and/or mounting surface.

Do not install near a heater, fireplace, direct sunlight or any other source of direct heat. 

Doing so could result in damage to the flat panel display and could increase the risk of fire.

WARNING:

WARNING:

WARNING:

WARNING:

CAUTION:

CAUTION:

CAUTION:

BEFORE YOU BEGIN, MAKE SURE YOU CAREFULLY READ AND UNDERSTAND THE INSTRUCTIONS IN THIS 

MANUAL. This bracket system incorporates a slide mount design. Our goal is to make this installation 

easy for you.  Please follow the instructions in the order presented in this manual and be sure to observe 

all warnings and cautions.

Содержание SPACE SAVER 30324














Отзывы: