8
Splice Track Pieces Together
Check the edges of the outside C
-
channels for rough edges. If there are any burrs, file them off before
splicing the track together.
Position the splice bars so they are half way inserted into one track.
Tighten the set screws in the bars.
Tap the large end of the 3/16" pin half way into one of the tracks.
Slide the other track onto the splice ensuring that the track pieces align on all sides.
Tighten the remaining set screws to lock everything together. Run your finger over the outer edges of
the tracks to assure there are no significant edges protruding. If there are, separate the track slightly
and realign as required to obtain a smooth transition between the track channels
.
3/16" Splice Pin
Splice Bars
