stayer HL105, Руководство по эксплуатации

Страница: 9 / 10

ENGLISH
Accessories and spare parts
Only use accessories and spare parts which have been approved by STAYER . Original accessories and spare parts
guarantee that the unit can be operated safely and without any breakdowns.
Symptom Possible Cause Remedy
Motor refuses to start - Plug not connected
- Mains socket faulty
- Fuse faulty/blown
- Extension cable damaged
- Motor protector has activated
- Frozen - Connect plug
- Use another socket
- Replace fuse
- Try without extension cable
- Allow to cool for 5 minutes
- Wait for pump/water supply hose/accessory to
thaw
Motor stops - Fuse faulty/blown
- Wrong mains voltage
- Motor protector has activated
- Replace fuse
- Check that mains voltage corresponds to
specifications on the model tag
- Allow to cool for 5 minutes
Fuses blow Fuses faulty/blown Change to a mains supply higher than the
pressure washer amp consumption
Excessive working pressure Nozzle partly blocked Clean nozzle
Pressure pulsating - Air in the inlet water supply hose/pump
- Inadequate water supply
- Water strainer blocked
- Water supply hoses squeezed
- High pressure hose too long
- Allow pressure washer to run with open spray
handle and nozzle at low pressure until regular
working pressure is obtained.
- Check that the water supply corresponds to
specifications. The minimum specification for
the water supply hose is 1/2" or 13 mm
diameter.
- Clean water strainer
- Straighten out kinked water supply hoses
- Dismount high pressure extension hose. Retry
(extension hose max. 7 m)
Pressure too low, but steady
Note! Several types of accessory will normally
deliver a lower pressure
- Nozzle worn
- Start/stop valve worn - Change the nozzle
- Activate trigger five times in quick succession
Motor starts up but no working pressure - No water supply
- Water strainer clogged up
- Nozzle clogged up - Connect water supply
- Clean the water strainer
- Clean nozzle
The pressure washer starts irregularly by itself Pump/power gun leaky Contact your STAYER Service Centre
Water leaks from machine Leaking pump 6 drops per minute are permissible. In case of
more serious leakage, you should contact your
STAYER Service Centre.
Replaceable Parts Table / T1
9
9