●
Example of using PARALLEL OUT
When listening to the source connected to the RCA terminal even with a loud-
speaker:
Prepare an RCA cable as shown on the right and connect it to the AUX input
terminal of the amplifier. Adjust the volume with the pre / pre-main amp.
6. Connection example
-6-
1. When adjusting the volume with the preamp attenuator,
connect to the RCA or XLR terminal of this unit.
Please prepare an XLR cable when connecting XLR.
2. Do not connect devices that can not adjust the output sig-
nal. It is to prevent it becoming a loud volume when switch-
ing carelessly.
Refer to page 5 (5. How to use) for details.
When adding a driver unit
②
When using a preamp or attenuator
①
Standard usage (factory default)
LINE output device such as DVD /
SACD / CD / TAPE / VIDEO etc.
LOUD SPEAKER
LINE output for PC and digital audio devices
For XLR connection:
Please prepare the XLR cable.
PRE-MAIN AMP.
MAIN AMP
with Volume control
DRIVER UNIT FOR EARSPEAKERS
SRM-700T
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
!
PARALLEL OUT
LEVEL CONTROL MODE
RCA
INPUT
L
R
R
L
XLR
STAX LTD.
MADE IN JAPAN SERIAL No.
GND
50/60Hz 54W
①
③
②
HOT
SHIELD
COLD
VACUUM
TUBE
OUTPUT
SOURCE
XLR RCA
・
INTERNAL
・
EXTERNAL
（
BYPASS
）
At ”EXTERNAL (BYPASS)” position
Volume can not be adjusted
!
PU
SH
PU
SH
Connect the output terminal of the preamp to the input terminal of the SRM-700T
First connect the source to the preamp's AUX input
XLR or RCA connection
LEVEL CONTROL MODE
・
INTERNAL
・
EXTERNAL
（
BYPASS
）
At ”EXTERNAL (BYPASS)” position
Volume can not be adjusted
!
PRE-OUT
When using a loudspeaker:
Connect from the parallel out terminal to the pre / pre-main amp.
Volume adjustment with preamp or attenuator
