STAX SR-X9000 Скачать руководство пользователя страница 7

 

SPECIFICATIONS

 

 

 Type: push-pull electrostatic large circular sound element, open-air type enclosure. 

 Frequency response: 5 - 42,000Hz 

 Impedance: 145k

Ω

 (

including the 2.5m accessory cable, at 10kHz

 Sound pressure sensitivity: 101dB / input 100Vr.m.s. / 1kHz 

 Bias voltage: DC580V 

 Left/Right channel marks: the gold solid line (left) and the dotted line (right) on the cable and L/R 

marks on the cable plugs. 

 Ear pad: Genuine leather 

(

a part contacting with skin

)

, high-quality artificial leather 

(

other parts

). 

● 

Weight: 432g 

(

cable not included

 Cable 

(

one each

)

: silver-coated 6N 

(

99.9999%

)

 OFC parallel 6-strand, low-capacity special wide 

cable, 2.5m and 1.5m full length. 

 

Use SR-X9000 with STAX Driver Units. 

Specs and appearance of SR-X9000 are subject to change without notice for update. 

-7-

 

Storage case made of paulownia wood; 

◆ 

Paulownia wood has an insect repellent and antiseptic effect and a great “humidity control effect”. 

 

◆ 

Paulownia wood has flame retardancy and low thermal conductivity.  

The case is suitable for storing earspeakers for a long time. 

 

◆ 

Light and soft woods such as paulownia wood absorb and release humidity when temperature 

changes. So humidity inside of the case almost does not change. 

 

◆ 

Before storing, dry enough the ear pads and the head pad to prevent mold. 

About “warranty guidelines” 

● 

For warranties, please confirm with the dealer from which you purchased or a nearest 

distributor. 

● 

Be sure to keep the warranty card after reading.  

(

The warranty card cannot be reissued.

)

 

 Since ear pads and head pads contact with the skin directly, they are consumables. 

They are not covered by the warranty. 

 It is recommended to exchange ear pads and head pads, if they deteriorate such as 

getting dirty or hardening. 

 Warranty may be invalid for failures using drivers or adapters other than our products.  

 In case you send your earspeaker for repair, please be sure to attach a memorandum 

specifying the model name of your driver unit or adaptor.  

 Keep in mind that without the memorandum warranty becomes invalid in spite of the  

warranty period.  

 Note that the repair will be charged without presentation of a proper warranty card. 

 

Содержание SR-X9000









Отзывы: