EN
30
ESC INSTRUCTION
Programming Mode Audible Tones:
Brake On/Off
NiCad
LiPo
Low 2.8V / 50%
Medium 3.0V / 60%
High 3.2V / 65%
Restore
Automatic (7-30°)
Low (7-22°)
High (22-30°)
Very Soft
Soft Acceleration
Start Acceleration
Rpm off
Heli first range
Heli second range
8 kHz
16 kHz
Positive / Reverse
Reduce Power
Hard Cut Off
(within the first 4 Sec.)
0
Throttle Calibration
1 Brake
2
Battery type
3
Low Voltage Cutoff Threshold
4
Restore Factory Setup Default
5
Timing Setup
6
Soft Acceleration Start Ups
7
Governor Mode
8
Motor Rotation
9
Switching Frequency
10
Low Voltage Cutoff Type
ESC Functions
Alert Tones:
The ESC is equipped with audible alert tones to indicate abnormal conditions at power up.
If the ESC can´t enter into working mode after powering up, indicates that you have not setup
throttle calibration.
1. Continues beeping tone (****) - indicates that throttle stick is not in the minimum position.
2. Single beeping tone followed by a one second pause (* * * *) - indicates that the battery pack
voltage is not within the acceptable range (The ESC automatically checks and verifies the bat
-
tery voltage once the battery is connected).
3. A single beeping tone followed by a short pause (* * * *) - indicates that the ESC is unable to
detect the normal throttle signal from the receiver.
Содержание L-13 BLANIK
