Staufenbiel Aiolos HSF0314083, Руководство пользователя

Страница: 14 / 20

14
Manual Aiolos Manual Aiolos
Drill a 3mm marking
hole direkt in front of the
trailing edge. Please note
that the hole must be
in one line to the servo-
horn.
Drill a 6x 17mm opening
for the clevis in the top
side of the wing. Use the
hole from the previous
step as a reference.
For the next step drilling the
holes the rudder horn and eye
bolts it is helpfull to use a DIY
drill template. Use a 20mm width
and 4mm thick piece of Balsa.
Cut thema as shown in two parts
and glue them in the angle of
45 °.