Status WRX900 Series, Руководство по эксплуатации

Страница: 72 / 86

72 of 86
11.4.3 Editing receiver parameters
How to proceed:
Step Activity
1 Use the navigation tree to select the desired main parameter of the
receiver (e.g. channels) by a double click with the left mouse key.
The channel parameters are mapped in.
2 Edit the parameters concerned.
3 Confirm editing with "OK".
4 Store the parameters in the "File" menu with the "Store" function.
11.4.4 Transmit new parameters to the receiver
How to proceed:
Step Activity
1
In the "Data transfer" menu select the "Data transfer to device"
function. The current parameters are transmitted to the receiver
2
Finish communication between setup program and receiver in the "Data
transfer" menu with the "Disconnect connection" function.
11.5 Customer-specific linearization
Due to the customer specific linearization (max. 40 grid points or polynomial of
fourth order), probes can be connected, which are not defined by the ex-factory
linearization. To activate the customer specific linearization, ensure that
"Potentiometer" or "Voltage" is configured as the sensor type on the transmitter.
The Customer specific linearization parameter must be configured to "tAb1 to
tAb4" in the channel specific parameters on the receiver.
In the
EDIT >CUSTOMIZED LINEARIZATION menu, the user can define the
linearization.