Statpower Prosine 2.5 Скачать руководство пользователя страница 5

2                                                     PROsine 2.5/3.0 Advanced Control System (ACS) Owner’s Manual

Control Buttons:

Button

What it does:

Comments:

ESCAPE

Moves up one level in the menu tree.

In a screen with settable values to
be changed, does not change the
last value set.

1.

 

Moves up one option in the selected
menu, or

2.

 

Selects the next higher value (or previous
choice) in a screen that allows the user or
installer to scroll through settable values.

This button is shown as 

 in the

following instructions.

For some menus, if you hold the
button down, it will scroll rapidly
through the numerical values.

1.

 

Moves down one option in the selected
menu, or

2.

 

Selects the next lower value (or next
choice) in a screen that allows the user or
installer to scroll through settable values.

This button is shown as 

 in the

following instructions.

For some menus, if you hold the
button down, it will scroll rapidly
through the numerical values.

Button

What it does:

Comments:

ENTER

1.

 

Selects the menu level, or

You can then use the 

 or 

buttons to move through the
screens at that level.

1

 

1

2

3

4

 

2

 

3

 

4

 

5

 

6

 7

 8

 9

 

10

 

11

 12

 13

 15

 14

 16

Содержание Prosine 2.5




















Отзывы: