7
Top View
Bottom View
Important: Ensure the worktop is heat-resistant to avoid deformation caused by the heat radiation
from the burners.
• Remove the pan supports, the burner lid and flame spreader and carefully turn the appliance
upside down and place onto a cushioned mat. Taking care not to damage the ignition devices
and flame safety devices.
• Apply the provided Sealing Strip around the edge of the appliance. Ensuring not to leave a gap
or overlapping the sealing agent.
• Locate the screw holes on the base of the appliance.
• Place the bracket over the matching holes and secure with a screw ensuring to allow the bracke
t
to move.
• Carefully turn the hob back over and then gently lower into the cut
hole.
• On the underneath of the hob, adjust the brackets into a position that
secures the appliance to the worktop or unit. Screw can now be fully
tightened.
(A) SEALING STRIP
(C)S CREW
(B)B RACKET
WARNING: Do not use a silicon sealant to seal the appliance
against the worktop or unit. This will make it difficult to remove the
appliance from worktops or units in the future, particularly if it needs
to be serviced.
