STAIRVILLE • PAR 56/64 10 MM BLACK/SILVER FLOOR RGB
2
www.thomann.de
Thank you
for choosing one of our LED PAR spot lights. Please read
this user manual carefully and follow the instructions to avoid danger or
damage to the unit due to mishandling. Keep this user guide for future
reference. If you give the unit to another user, be sure that he also
receives this instruction booklet.
Safety instructions
You have to carefully read the instruction, which includes important
information about the installation, usage and maintenance, BEFORE
operating this device.
X
This device is exclusively meant to be used as an effect light unit within
the limits given in this manual. Using it in any other way you risk electric
shock and warranty will become void.
X
Unpack and check carefully there is no transportation damage before
using the unit.
X
Before operating, ensure that the voltage and frequency of power supply
match the power requirements of the unit as stated in this manual.
X
It’s important to ground the yellow/green conductor to earth in order
to avoid electric shock. Never sever or manipulate any part of the
mains connection. If a power cord is provided with an earth lead, this is
mandatory to ensure safe operation! Otherwise a
LIFE THREATENING
situation exists!
X
The unit is for indoor use only. Use it only in a dry location. Exposing the
device to rain or moisture would cause the risk of electrical shock or fire.
X
DO NOT let any liquids or objects enter the unit. Should any liquid
be spilled on the unit, DISCONNECT the power supply to the unit
immediately and contact the service company.
X
The unit must be installed in a location with adequate ventilation, at
least 15 cm from adjacent surfaces. Be sure that no ventilation slots are
blocked.
X
Check the surrounding area and make sure there are no flammable liquids,
water or metal objects that could enter the fixture. If a foreign object or
substance enters the unit, immediately disconnect the mains power.
X
Disconnect the device from the mains power before any servicing or
maintenance.
X
Notice regarding power disconnection:
To disconnect the device from the power source the mains adaptor must
be removed from the power socket. For this reason the device must
be placed in a position where a constant unobstructed access to the
