STARVILLE MH-x30 LED Spot, Руководство пользователя

Страница: 33 / 64

Press [Mode] repeatedly until the display shows ‘Show Mode’ . Press [Setup] . With [Up] or
[Down] you can select an auto show ‘Show 01’ to ‘Show 08’ .
Automatic operation can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[Setup] to save the setting and close the submenu. To close the submenu and the main
menu without making changes, press [Mode] or wait for 20 seconds.
Press [Mode] repeatedly until the display shows ‘Slave Mode’ . Press [Setup] . With [Up] or [Down]
you can select an operating mode:
n
‘Slave1’ : The device is controlled by another device, which is configured as master. It
exactly follows the movements and light effects of the master.
n
‘Slave2’ : It follows the movements and light effects of the master in reverse direction.
When the display shows the desired value press [Setup] to save the setting and close the sub‐
menu. To close the submenu and the main menu without making changes, press [Mode] or
wait for 20 seconds.
This setting is only relevant if the device is not controlled via DMX.
Auto show
Operating mode ‘Slave’
Operating
MH-x30 LED Spot
33