STARVILLE LED Flash LF12, Руководство пользователя

Страница: 30 / 40

This setting takes effect only when the device is the slave in a master/slave configuration and is
not operated under DMX control. In this operating mode, the device responds to the control
signals of the master device.
Press
[Mode] until the display shows ‘SLAv’ .
This setting takes effect only when the device is operated under DMX control.
Press
[Mode] until the display shows ‘d.xxx’ .
Use the [Up] and [Down] buttons to select a DMX address in a range from ‘d.001’ to ‘d.512’ .
Press [Setup] . Use the [Up] and [Down] buttons to select one of the following DMX modes:
‘Master/slave’ operating mode
DMX mode
Operation
strobe
30