4. If you wish to detect a signal with a dedicated SSID, simply hold down the
Scan
button
for 4 seconds to enter
Lock
mode. When the detector is in
Lock
mode, an icon with a
capitalized
L
will appear in the upper middle corner of the display:
In
Lock
mode, the detector constantly refreshes the signal strength, so the user can
move around to find where the detected signal strength is at it’s peak. Hold down the
Scan
button for 4 seconds again, to unlock from
Lock
mode.
Driver and Utility installation
Note:
Please do not install the USB adapter into the computer prior to installing the
necessary software.
Note:
If the Wireless PC Card driver and Utility were previously installed on the host
computer, please uninstall the original version prior to attempting to install a second time.
The following instructions depict installation on a Windows XP system. Please note that
installation procedures are similar for Windows 98SE, ME, 2000 and 2003 Server.
To install the USB adapter:
1. Insert the Installation CD into the CD/DVD-ROM drive. Browse to, and execute the
Setup program, to launch installation:
Instruction Manual
5
