IIn
ns
stta
alllla
attiio
on
n
Connecting USB5N1DOCK to your computer
1. Plug the power adapter into the power port on the USB5N1DOCK. Plug the opposite
end of the adapter into an available power source.
2. Plug the rectangular (Type A) end of the USB 2.0 cable into an available USB 2.0 port
on your computer. Plug the opposite end (Type B) into the corresponding port on the
USB5N1DOCK.
3. Once all necessary connections have been made, Windows will automatically detect
the new device, and run the
Add New Hardware Wizard
. Please click on
Next
,
once the wizard appears.
5. At the next screen, you will be given the option to
Search for the best driver for your
device (Recommended)
. Please ensure that this option is selected, and click
Next
.
6. Windows will then locate the appropriate driver for the device, titled
Generic USB Hub
on USB 2.0 Bus
. Once the file has been found, please click on
Next
.
7. When you receive the message
Windows has finished installing the software that
your new hardware device requires
, please click on
Finish
.
Instruction Manual
2
Front View
Rear View
Power port
USB port (to computer)
