Instruction Manual
6
Use Mac OS to change the display mode
By default, the docking station is set up as an extended display.
• Do one of the following:
• To change the display to
Mirror
mode, on the
Arrangement
screen on a
display, select the
Mirror Display
check box.
• To change the display to
Extend
mode, on the
Arrangement
screen on a
display, clear the
Mirror Display
check box.
Supported video resolutions
See the video resolution chart below for specific configurations and supported
resolutions:
Note:
Depending on the configuration and the supported resolutions of your
connected monitor, the docking station may support video resolutions lower than
specified above.
Video Output
Max HDMI Resolution
HDMI - Single
Display
2560x1440