2
Introduction
Top View
Bottom View
1. Mouse and keyboard ports. The cables from the PS/2 mouse and PS/2 keyboard
plug in here. The ports are marked with an icon to indicate which is which.
2. Mouse and keyboard LEDs. These flash when the keyboard or mouse is
transmitting datapackets.
3. USB A type connector. This connector plugs into the computer’s USB port, or into a
USB Hub that is connected back to the computer.
4. Wake up switch - used to bring your computer out of sleep mode when PS/2
peripherals do not work.
Installation
To instal simply plug the cables into their appropriate sockets:
1. Plug the PS/2 mouse and PS/2 keyboard into the appropriate connectors on the
USB2PS2 adapter. The ports are marked with an icon to indicate which is which.
2. Plug the USB2PS2 USB plug into the computer’s USB port, or into a USB Hub that
is connected back to the computer.
After completing these steps, simply use the mouse and keyboard as you normally
would.
USB Port
