Instruction Manual
4
CCoonnffiigguurraattiioonn
To configure the image being displayed by the monitor that is connected to USB2DVI,
right-click on a blank section of the desktop, select
Properties
, then click on the
Settings
tab to display the following screen:
Dropdown
Menu
Resolution
Adjustment
Slider
Configure the secondary display by selecting it from the dropdown menu, then adjusting
the desired settings:
Using the Second Display in Extended Mode
In Extended Mode, the monitor that is connected to USB2DVI creates an extension of the
Windows Desktop displayed on the primary monitor. To set the display to function in this
mode (once selected from the dropdown menu), check the box marked
Extend my
windows desktop onto this monitor
, then arrange its position (virtually) with respect to
the primary monitor by dragging the monitor icons (shown above as
Primary/Secondary
orientation
) to reflect the physical orientation of the displays.
Using the Second Display in Clone Mode (default)
In Clone Mode, the monitor that is connected to USB2DVI simply mirrors the image
displayed on the primary monitor. To set the display to function in this mode (once
selected from the dropdown menu), uncheck the box marked
Extend my windows
desktop onto this monitor
.
Primary/Secondary
orientation
Designating the Primary Display
To select which of the connected monitors will act as the primary display, select the
monitor that will be used as the Primary Display from the Dropdown menu (referenced on
page 4), and place a checkmark next to
Use this device as the primary monitor
. On
some displays it is necessary to disable the main display (i.e. uncheck the box marked
Extend my Windows display onto this monitor
for the main display).
