FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be
returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages
arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Installation
Prepare Your Site
1. Place your host computer where desired and set it up.
2. Ensure that the Remote Extender is within 40m (131ft) of the
Local Extender when using Cat5/5e Ethernet cable, or 50m (165ft)
when using Cat 6 Ethernet cable.
3. Ensure there is an Available AC electrical outlet at the Remote
Extender location.
Install RJ45 Terminated Cat5 or Higher Ethernet Cable
1. Connect an RJ45 terminated Cat5 or higher Ethernet cable to the
RJ45 port on the Local Extender.
Notes:
If using a wall box, ensure that the Ethernet cabling
between the Host Unit and the Remote Unit has been
properly terminated in each location.
Ensure your Ethernet cabling is long enough to connect the
Local Extender and Remote Extender respectively.
Do not patch the Ethernet cabling through any networking
equipment (eg. router, switch).
2. Connect the other end of your RJ45 terminated Cat5 or higher
Ethernet cable to the RJ45 port on the Remote Extender.
Install Local Extender
1. Connect an available USB A port on your host computer to the
Mini-USB 2.0 host port on the Local Extender using the provided
Mini-USB to USB 2.0 A Cable.
Note:
If the connected host computer enters Sleep, Standby,
Hibernate, or Power Save mode, USB extension functionality may
fail upon “Wake up”. To ensure proper operation, do not allow your
connected host computer to enter these modes. See your computers
documentation to ensure these modes are not enabled on your host
computer and for instructions to disable any enabled modes.
Install Remote Extender
1. Connect your USB peripheral device(s) (eg. printer, keyboard, etc.)
to the Remote Extender USB “A” device ports using the respective
cable for each device (not included).
2. Connect the provided Power Adapter to an available electrical
outlet, and then to the DC power input on the Remote Extender.
3. If required, power on your USB peripheral devices as desired,
followed by your host computer.
