Instruction Manual
4
Install the extender
1. Connect the USB 2.0 cable (included) to the local unit’s host port and to the host
computer’s USB-A port.
2. Connect a Cat5e Ethernet cable to the local unit’s RJ45 port and to the remote unit’s
RJ45 port.
3. Connect your USB peripheral device to the remote unit’s USB-A port.
4. Select the appropriate power cord for your region and connect it to the power
adapter.
5. Connect the power adapter to an AC electrical outlet and then plug it into the
DC
(power input) port
on either the local or remote unit.
Installation notes
• Do not route the Ethernet cable through any networking equipment (for example, a
router, or a switch).
• Make sure that your Ethernet cable is long enough to connect the local unit to the
remote unit (maximum extension distance is 100 m or 330ft.).