Instruction Manual
6
1. Click on the pop-up message.
2. On the following prompt, select
Always Connect
from the drop-down list.
3. Click
OK
. If required, follow any other on-screen instructions to complete the
installation.
The drivers can also be found under the
Support
tab on our website at
http://www.startech.com/TB3DK2DPWUE.
Charge a device
If you’re only using the front USB 3.0 port to charge a device, a connection to a host
laptop isn’t required.
• To charge a device, connect it to the USB 3.0 port located on the front of the
docking station.
Note:
This front USB 3.0 port can only fast-charge connected devices that comply with
USB Battery Charging Specification Revision 1.2.
Configure a display device
Use your Windows operating system to adjust display settings for multiple monitors.
Your laptop hardware must support dual external displays through its Thunderbolt 3
port.
Connect a display to the DisplayPort port
The docking station’s DisplayPort connection supports DisplayPort 1.2, as well as
DP++. Because the port supports DP++, you can use passive adapters or cables to
connect different types of monitors to the DisplayPort port.
Type of Display
Adapter Needed (sold separately)
DisplayPort
None
HDMI display
DisplayPort to HDMI Adapter (DP2HDMIADAP)
DVI display
DisplayPort to DVI Adapter (DP2DVI)
VGA display
DisplayPort to VGA Adapter (DP2VGA2)
Connect a display to the Thunderbolt 3 USB-C port
You can also connect a display (or a display adapter) to one of the docking station’s
Thunderbolt 3 USB-C
ports. One of the docking station’s Thunderbolt 3 ports must
remain connected to your host laptop.
Visit www.StarTech.com for a range of USB-C video adapters and cables.
