16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
1.
Hold the
Media Shelf Assembly
up against/behind the
Support Blocks
,
located on the insides of the
Columns
.
Align the holes in the
Support Bar
with the holes in the
Support Blocks
. (Figure 9)
2.
Insert one
M6 x 25 mm Hex Head Screw
through the hole
in the
Support Block
on the
Left Column
and into the
Support Bar
.
3.
Tighten the
M6 x 25 mm Hex Head Screw
, using the Hex
Key.
4.
Repeat steps 2-3 for the
Right Column
.
5.
Determine the desired mounting height for the
Media Shelf
Assembly
.
6.
Hold the
Media Shelf Assembly
and loosen the two
Hex
Screws
that secure the
Support Block
to the
Left Column
,
using the
Hex Key
.
Note:
Continue to support the weight of the
Media Shelf
Assembly
until all of the
Support Block Hex Screws
have
been tightened.
7.
Repeat step 6 for the
Support Block
in the
Right Column
.
8.
Slide the
Media Shelf Assembly
up or down to the desired
height.
9.
Tighten all four
Support Block Hex Screws
, using the
Hex
Key
.
