Instruction Manual
7
•
Auto-Negotiation 1000 Mbps
. The adapter only advertises gigabit speed at
full duplex.
Advanced Tab
All of the settings explained in the following sections can be accessed / modified from
the Advanced tab in the device properties:
1. Open the Device Manager and expand the
Network Adapters
section.
2. Right-click the Intel i350 Gigabit Network Connection you wish to configure
and select
Properties
.
3. Click the
Advanced
tab.
4. Make your desired modifications.
5. Click OK to apply the changes.
Gigabit Master Slave Mode
Decides whether the adapter or link partner, is designated as the master. The other
device is designated as the slave. Changing the setting can improve link quality with
certain link partners.
NOTE:
Some multi-port devices can be forced to master mode. If forced to master
mode, the device can either disconnect or downshift to a 100-Mbps link. This issue can
also occur in a Forced Slave to Forced Slave mode. Changing this setting can cause a
momentary loss of connectivity.
