Instruction manual
2
Receiver unit
Front view of receiver
Back view of receiver
Preparing your site
Note:
The ST12MHDLAN HDMI extender kit can use a Gigabit LAN Network to
extend the signal. Most Gigabit Network portals have a cable length restriction of
330 ft. (100m). Refer to the manufacturer of the equipment to determine the length
restriction and ensure the Transmitter Unit, and Receiver Unit(s) are all within the
restricted range of the nearest network portal.
Ensure the Transmitter Unit, and Receiver Unit(s) are all situated near an available AC
electrical outlet.
1. Determine where the local video source (i.e. computer, Blu-ray Player) will be
located and set up the device.
2. Determine where the remote display will be located and place/ mount the display
appropriately.
3.
(Optional)
If using additional receiver units (ST12MHDLANRX sold separately),
determine where the remote displays will be located in and place/ mount the
displays appropriately
1. F1
2. F2
3. Dip rotary switch
4. Serial control (not active)
5. Serial extension (for
extending RS232 signal)
1. Power jack
2. Reset LED
3. Reset button
4. LAN port (RJ-45 connector)
5. Video out
1
1
3
4
5
2
2
3
4
5
Note:
Serial 1 (Control) Ports are not active. To control the ST12MHDLAN please
download our free mobile application. (see Page *.)
