Quick Start Guide
Manual Revision: 06/26/2018
Product Design
Actual product may vary from photos
Front View
Rear View
Package Contents
• HDMI Splitter x 1
• Universal Power Adapter x 1
• Quick-Start Guide x 1
Requirements
Operating system requirements are subject to change. For the
latest requirements, please visit
www.startech.com/ST122HD202
.
Displays:
Displays are sold separately.
• HDMI Video Source Device x 1
• HDMI Displays x 2
Cables:
Cables are sold separately.
• HDMI Cables x 3
SKU #:
ST122HD202
4-Port HDMI® Video Splitter - 4K 60Hz
Installation
Note:
Before you begin the installation, ensure your HDMI source
device and each of the HDMI video displays are powered off.
1. Connect an
HDMI Cable
, to the
HDMI Input Port
on the
HDMI
Splitter
. Connect the other end of the
HDMI Cable
in the
HDMI
Output Port
on the
Video Source Device
.
2. Connect an
HDMI Cable
, to the
HDMI Out 1 Port
on the
HDMI
Splitter
. Connect the other end of the
HDMI Cable
in the
HDMI
Input Port
on the
Display
.
3. Repeat Steps 1 - 2 to connected a second display.
4. Connect the
Universal Power Adapter
to the
DC 5V Power
Adapter Port
on the
Video Splitter
. Connect the other end of
the
Universal Power Adapter
to an
AC Electrical Outlet
.
5. Turn on the
Video Source Device
.
6. Turn on the
Displays
7. Verify that the video source is on the connected
Displays
.
EDID Switch
The
HDMI Splitter
features an
Extended Display Identification
Data (EDID) Switch
that allows you to use the EDID settings
from the display connected to the
HDMI Out 1 Port
, or emulate
standard EDID settings.
By default the EDID Switch is set to default (standard).
EDID Default Settings:
•
Resolution:
1920 x 1080 60Hz
•
Audio:
2 channel stereo
Using HDMI Out 1 Port EDID Settings
1. On the
HDMI Splitter
, change the
EDID Switch
from default to
display.
Note:
To switch back to the Default EDID setting, switch from
display to default and follow Steps 2 - 3.
2. Disconnect the
Universal Power Adapter
from the
AC Electrical
Outlet
and then disconnect it from the
HDMI Splitter
.
3. Reconnect the Universal Power Adapter to the
DC 5V Power
Adapter Port
on the
Video Splitter
. Connect the other end of
the
Universal Power Adapter
to an
AC Electrical Outlet
.
For the latest information, specifications, and support visit www.startech.com/ST122HD202.
Power
LED
Input
LED
Output
LEDs
EDID
Switch
HDMI Out
Port 2
HDMI Out
Port 1
HDMI In
Port
DC 5V
Port
