Instruction manual
7
Insert an iPad
To prevent scratching, you should handle the iPad with care when you insert it into the
tablet holder.
Note:
Make sure that all of the necessary cables are plugged into the iPad before you
insert it into the SECTBLTPOS.
1. Thread the iPad cables through the hole in the bottom of the rear plate (
3
).
2. Place the iPad in the rear plate so that it’s sitting on the two 25x100x15 mm foam
pads (
7
) (
figure 8
).
figure 8
3
iPad
3. Place the front plate (
2
) over the iPad (
figure 9
).
figure 9
2
4. To lock the front and rear plates together, press the button in the middle of the lock
on the side of the plate (
figure 10
).
figure 10
7
