14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4.
Select
Enter Password
and press the
OK
button.
5.
Do one of the following:
•
To set a numeric character, press the up arrow navigation
button to select a number and press the
OK
button.
•
To set an uppercase letter, press the down arrow navigation
button to select a letter and press the
OK
button.
6.
When you’re done selecting the characters in your password,
press the
OK
button.
7.
Press the
ESC
button until you have exited the
Log Manager
menu to return to the
Erase mode
menu.
Printing a Receipt
You can use SDOCK1EU3P2 with a serial printer to print an erase
record with details of the process, including the date and time
that the drive was erased, the erase mode used, and more. The
receipt also includes an area for a signature.
Note:
The RS232 serial-based printer port uses 9600 baud.
1.
Use the RS232 serial-based printer port to connect a serial
printer to the eraser.
2.
Configure the connected serial printer to work on 9600
baud. Consult the documentation that came with the serial
printer for more information about how to configure it.
3.
When a process is complete, a receipt automatically prints
on the connected serial printer.
