Installing SCSI devices into the Drive Case
1. Locate the arrow buttons on both sides of the case. Press the buttons and lift the cover.
2. To install your devices:
a) For CD-ROM - Install the CD-ROM and join the connector, power & RCA jack
then fasten the enclosed screws on both sides of the interior side panels, securing
the device into place.
b) For Hard Drive Drawers - Install the Hard Drive Drawer and join the
connector & power then fasten the enclosed screws on both sides of the interior
side panels, securing the device into place. (To install drive drawers that are 3.5
inches requires an adapter bracket, such as the StarTech.com BRACKET)
c) For other devices, read the instructions on your device manual.
3. Join the connectors with the following descriptions:
ID Switch (SCSI I/II)
ID Switch (Wide SCSI)
HDD LED Out
Audio
Power
4. Close the cover.
Color
Red
Blue
Yellow
Black
Color
Red
Blue
Yellow
Brown
Black
Color
Yellow
White
Color
Red
White
Black
Color
Red
Black
Black
Yellow
ID SW
1
2
4
COM
ID SW
1
2
4
COM
8
Yellow
LED
+
-
RCA
Jack
Right
Len
COM
DC
power
+5
COM
COM
+12
7
