StarTech.com SATDUP11IMG, Руководство пользователя

Страница: 8 / 27

7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Hardware Installation
Warning! Hard drives and drive duplicators require care-
ful handling, especially when being transported. If you are
not careful with your hard disk, lost data may result. Be sure
that you are properly grounded by wearing an anti-static
strap when handling computer components or discharge
yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for
several seconds.
1.
Ensure the
Power Switch
is set in the Off position. Connect
the
Universal Power Adapter
to the
Power Adapter Port
on the back of the
Duplicator
an the other end to an
AC
Electrical Outlet
.
2.
Connect a Source Drive to the SATA HDD Source Port on
the Duplicator .
•
SATA HDD/SSD
: Connect the
Short SATA Cable
(included)
to the
SATA HDD Source Port
and the other end to the
SATA Port
on the
SATA HDD/SSD.
•
PC Installation: Connect the Long SATA Cable (included)
to the SATA HDD Source Port and the other end to the
SATA Port on a SATA HDD/SSD installed in a PC .
•
eSATA HDD/SSD Enclosure or Docking Station: Connect
the eSATA + 12V Power Cable (included) or eSATA+5V
Power Cable (included) to the SATA HDD/SSD Port and
the other end to a SATA Port on an Enclosure or Docking
Station .
Note:
The
Source Drive
can be a drive you intend to make
an exact copy of, or an Image drive containing several hard
drive images.