4
How to Use
If the SATA controller supports Hot-Swapping drives, then hard drives
can be removed and installed into the Mobile Rack without having to
shut the computer system off. Refer to the documentation for the SATA
controller for details on how to use Hot-Swapping. If not supported, the
computer must be shut down first, to install or remove hard drives.
To remove hard drives from the Mobile Rack, unlock the front drive bay
door (if necessary) with the provided keys and open the door by pulling
on the metal latch. Swing the door fully open and the drive will be
ejected, and can then be pulled out of the drive bay by hand.