Instruction Manual
7
Insert the second drive (containing no
data) into the drive tray, and fasten it to
the tray with the screws provided.
Secure the drive tray to the enclosure
connections, and fasten the tray to the
enclosure using the screws removed
earlier (depicted on page 4)
Place the cover back on the
enclosure, and replace the screws
removed earlier.
Power on the enclosure.
SAT3520U2R will indicate that the
Rebuild
function is under way (the
corresponding light will display
activity), as the data from Drive 1 is
mirrored onto Drive 2, and RAID 1 is
configured on the drives.
Please note that the Mirroring process
may take several minutes, depending
on the quantity of data being mirrored.
Please do
NOT
power off the
enclosure, until the HDD2 Error LED
is no longer illuminated.