Instruction Manual
16
At a command prompt, type
2.
diskpart.
Type
3.
list volume to display the existing volumes on the computer.
Type
4.
select volume <volume_number> where “<volume_number>”
is number of the volume that you want to extend. In this case that will
be “2”:
Type
5.
extend
Type
6.
exit to quit Diskpart.exe
The volume size will be updated to reflect the expanded physical stor-
age capacity while maintaining all of the existing data that is stored on
the volume. The result of extending the hard disk partition/volume is
illustrated below.
Before extend:
After extend:
