Instruction Manual
5
4. Place the top cover back into the drive tray in the same manor it
was removed, and slide each of the cover Lock/Release switches
back to the inside of the enclosure toward the lock indicator.
5. Complete installation by connecting the included USB cable from
the USB 3.0 Micro type B port on the enclosure to an available
USB port on the computer system.
How to Use
Connecting the Hard Drive
Once the enclosure has been attached to a computer, and the OS
has installed the necessary software, the drive will be accessible as
though it were installed within the system.
Prior to using the drive, it will need to be formatted according to
your operating system requirements. To format your newly attached
hard drive, or create partitions, please see the Initializing the Hard
Drive section.