For manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Quick Start Guide
Safety Measures
• Wiring terminations should not be made with the product and/or electric lines under power.
• Product installation and/or mounting should be completed by a certified professional.
• Please note that the included power cables are for use with this product only and cannot be
used with other electrical devices.
Mesures de sécurité
• Les terminaisons de câblâge ne doivent pas être effectuées lorsque le produit et/ou les câbles
électriques sont sous tension.
• L’installation et/ou le montage du produit doit être réalisé par un professionnel certifié et
dans le respect des normes locales et du code de construction local.
• Veuillez noter que les câbles d’alimentation inclus sont destinés à être utilisés avec ce produit
uniquement et ne peuvent pas être utilisés avec d’autres appareils électriques.
安全対策
• 電源が入っている状態の製品または電線の終端処理を行わないでください。
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に従い、有資
格の専門業者が行うようにしてください。
• 本製品に付属しております電源ケーブルは、本製品にのみ使用が可能で他の電気機器
には使用できませんのでご注意ください。
Misure di sicurezza
• I terminiali dei fili elettrici non devono essere realizzate con il prodotto e/o le linee elettriche
sotto tensione.
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un tecnico
professionale certificato che conosca le linee guida locali sulle norme edilizie e sulla sicurezza.
• Si prega di notare che i cavi di alimentazione inclusi sono da utilizzare solo con questo
prodotto e non possono essere usati con altri dispositivi elettrici.
Säkerhetsåtgärder
• Montering av kabelavslutningar får inte göras när produkten och/eller elledningarna är
strömförda.
• Installation och/eller montering får endast göras av behöriga yrkespersoner och enligt
gällande lokala förordningar för säkerhet och byggnormer.
• Observera att de medföljande strömkablarna endast är avsedda för den här produkten och
inte kan användas med andra elektriska apparater.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and
on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or
modifications not expressly approved by StarTech.com could void the user’s authority to operate
the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected
names and/or symbols of third-party companies not related in any way to StarTech.com.
Where they occur these references are for illustrative purposes only and do not represent an
endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of their
respective holders.
Warranty Information
This product is backed by a two-year warranty. StarTech.com warrants its products against defects
in materials and workmanship for the periods noted, following the initial date of purchase. During
this period, the products may be returned for repair, or replacement with equivalent products at
our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its
products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers,
directors, employees or agents) for any damages (whether direct or indirect, special, punitive,
incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss,
arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If
such laws apply, the limitations or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT
Hoofddorp
The Netherlands
• Consider your airflow requirement when selecting a location for
installation.
• The
Console
should be installed with a balanced mechanical
load.
• It’s recommended that the
Console
be connected to a power
source with overcurrent protection and supply wiring.
• The
Console
should be grounded appropriately.
• Installation depth:
1. Connect a
Grounding Wire
to the
Ground Connection Screw
on the
LCD Rackmount Console
and to the earth-ground
connection.
2. Connect one of the
KVM Cables
to a
Computer
or
Server
and the other one to the
Host Ports
on the
LCD Rackmount
Console
. You can connect up to 16 computers or servers.
3. Connect the appropriate
Power Cord
for your region to the
Power Connection Port
on the
LCD Rackmount Console
and to
a
Power Source
.
4. Open the
LCD Rackmount Console
. For more information about
how to do this, see the “
Open the Console
” topic.
5. Use the
Power Switch
to turn on the
LCD Rackmount Console
.
Note:
The
LCD Rackmount Console
makes two beeping sounds
and the LED flashes three times when turned on.
6. Turn on the connected
Computers
or
Servers
.
7. On the
Login
screen on the
LCD Rackmount Console
, do one of
the following:
• If you’re using the console for the first time or you haven’t
set a username and password, leave the text fields blank and
press
Enter
.
• If you have set a username and password, enter the
information in the corresponding text fields and press
Enter
.
8. Connect an optional monitor, keyboard, or mouse, connect the
peripherals to the corresponding ports on the console.
9. To daisy chain additional KVM switches, connect the switches to
the
Daisy Chain Port
on the
LCD Rackmount Console
.
Disconnect the Console
1. Power off the connected
Computer
,
Server
or
KVM
.
2. Close the
LCD Rackmount Console
. For more information about
how to do this, see the “Close the console” section.
3. Use the
Power Switch
to turn off the
LCD Rackmount Console
.
Operation
Open the Console
1. Move the
Release Switch
to the unlocked position.
2. Use the
Handle
to pull the
LCD Rackmount Console
out
towards you until you hear the
LCD Rackmount Console
click
into place.
3. Pull the
Display
up and position it at the desired angle.
4. Disconnect the
Power Cord
from the
Power Connection Port
on the
LCD Rackmount Console
.
Note:
Always disconnect the
Power Cord
before disconnecting the
Grounding Wire
.
5. Disconnect the
KVM Cable
connected to a
Computer, Server or
KVM
.
6. (Optional) Disconnect the
Grounding Wire
connected to the
Ground Connection Screw
on the
LCD Rackmount Console
.
Close the Console
1. Lower the
Display
until it’s flush against the
Keyboard
.
2. Slide the
Release Switches
on the
LCD Rackmount Console
forward and push the
LCD Rackmount Console
in towards the
rear of the rack.
3. Release the
Switches
and continue pushing the
LCD Rackmount
Console
the rest of the way into the rack.