18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Slide the Mounting Rail
Use the Mounting Rail Tapped Holes
The mounting rails come pre-installed in the enclosure but you
can adjust the mounting rails so that you can use the tapped
holes to install your equipment.
Note:
Do not attempt to adjust the mounting rails when
equipment is installed in the enclosure. Remove the equip-
ment first before you adjust the mounting rails.
1.
Each of the mounting rails is connected to the enclosure
with a screw and cage nut in the upper and lower corners of
the mounting rail. Use a Phillips type screwdriver to remove
the screws and cage nuts from the mounting rails.
