Instruction Manual
6
Din Rail / Wall Bracket Installation
If you are mounting the POEINJ2GI product onto either a DIN Rail or to a wall, you will
first need to attach the appropriate bracket(s) to the device as shown below.
Hardware Installation
1. Connect an Ethernet cable from the desired source network device (i.e. computer,
router, switch, etc.) to the “Data In” RJ45 connectors of the POEINJ2GI unit. These
can be connected to the same router/switch, or a different one depending on your
application.
2. Connect the terminal block power source to the POEINJ2GI unit.
3. Connect an RJ45 terminated Ethernet cable to the “PoE Out” connectors on the
POEINJ2GI unit. The other end of the cable will either connect directly to a PoE+ /
PoE-compliant device, or to a POE Splitter device to separate data and power.
Power Supply
POEINJ2GI
PoE Wireless
Access Point
Non-PoE
Ethernet Switch
PoE
DATA + POWER
DATA
POWER
