Instruction manual
2
Introduction
This 2-port Gigabit PoE+ extender spans your Power over Ethernet (PoE) devices
over longer distances, letting you double the 100 m limitations of a traditional PoE
infrastructure. You can connect two Gigabit PoE devices up to a maximum of 200 m
(total distance) away, so it’s easy to install a remote IP camera or access point. Plus, the
extender can be daisy-chained, for more scalability.
Packaging contents
• 1 x Gigabit PoE+ Extender
• 4 x rubber feet
• 1 x quick-start guide
System requirements
• Three RJ45-terminated Cat5 or better Ethernet cables (solid UTP cable is highly
recommended)
• 10/100/1000Mbps compatible network and devices
• One or two PoE or PoE+ Powered Device(s) (PD) that comply with IEEE 802.3at or
802.3af standards (extends up to two PoE or PoE+ devices)
• One PoE or PoE+ Power Source Equipment (PSE) device that complies with IEEE
802.3at or 802.3af standards
Notes:
• Total extension distances might be shorter due to power-delivery voltage drop on
the connected cables. The maximum distances can vary based on the quality of the
UTP cables and the environment the extender is integrated into.
• To ensure optimal performance and extension distance, it’s highly recommended
that you use solid Cat5 or better ethernet cable, rather than using stranded cable.
System requirements are subject to change. For the latest requirements, please visit
www.startech.com/POEEXT2GAT.
