Instruction Manual
DE:
Bedienungsanleitung - de.startech.com
FR:
Guide de l'utilisateur - fr.startech.com
ES:
Guía del usuario - es.startech.com
IT:
Guida per l'uso - it.startech.com
NL:
Gebruiksaanwijzing - nl.startech.com
PT:
Guia do usuário - pt.startech.com
Manual Revision: 02/25/2015
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1x Gigabit Power over Ethernet Extender
• 1x Instruction Manual
System Requirements
• RJ45 terminated CAT5 or higher Ethernet cabling (“Solid” UTP cable
recommended)
• 10/100/1000 Mbps compatible Power over Ethernet network and/or
devices (PoE/PoE+)
• PoE devices must comply with IEEE 802.3at or 802.3af standards
Note: Total extension distances can often be shorter due to power
delivery voltage-drop on the connected cables. Maximum distances can
vary based on the quality of the UTP cables and the environment.
Product Overview
Input Side
Output Side
POEEXT1GAT
Gigabit Power over Ethernet Extender 802.3at / 802.3af - 330ft (100m)
LEDs
10/100/1000
PoE+ RJ45
Input Port
10/100/1000
PoE+ RJ45
Output Port
LED Indicators
LED
Indication
PoE IN (Green)
Solid: Indicates that the port is
providing 52-56V (802.3at) / 48V
(802.3af) DC in-line power (PSE is
connected)
Port
Function
IN Port (Input)
Connect the PoE IN port from a
802.3at / 802.3af Power Sourcing
Equipment (PSE) device through CAT5
or higher Ethernet cabling:
• PoE injector
• PoE injector hub
• PoE switch
• Another POEEXT1GAT in a daisy
chain configuration
OUT Port (Output)
Connect the PoE OUT port to a 802.3at
/ 802.3af PoE powered device (PD)
through CAT5 or higher Ethernet
cabling:
• PoE camera
• PoE wireless access point
• PoE splitter
• Another POEEXT1GAT in a daisy
chain configuration
Installation
The PoE Extender supports 10Mbps, 100Mbps and 1000Mbps network
speeds and will automatically detect the speed of the incoming
connection.
Before installation, check your network infrastructure. If there are any
IEEE 802.3at / 802.3af devices that require power, the PoE Extender
can provide power and data Ethernet connectivity conveniently, and
easily.
The PoE Extender should be installed between the PSE (Power Source
Equipment) and the PD (Powered Device). It is powered by PSE and
forwards the Ethernet data and remaining PoE power to the PD.
The PoE extender does not require an external power supply and
will inject power to the PDs without affecting data transmission
throughput.
Port Connections
There are two RJ45 ports on the PoE Extender. The “IN” port functions
as “PoE (Data and Power) input” and the “OUT” port functions as “PoE
(Data and Power) output”.
LNK/ACT (Green)
Solid: Indicates that a port link is
established (PSE link is detected)
Blinking: Indicates that the PoE
Extender is actively sending or
receiving data over the IN port
(activity)
PoE OUT (Green)
Solid: Indicates that the port is
providing 52-56V (802.3at) / 48V
(802.3af) DC in-line power (PD is
connected)
